Our Products
A well-constructed air diffuser should be sturdy and well-designed, with no loose parts or obvious defects. Check the seams and connections to make sure they are solid and well-made.
Our Products
Best Quality
We Provide Best Products
Safety Guarantee
Our Products are safe
100% Customer
Our Satisfied Customers
Click the link below to download the catalogue
01.
Air Grilles
A grille is a vent cover through which air is blown into or out of a room for circulation back to the central heating or cooling unit. These are commonly found if you have heating or central air conditioning. A grille has no damper to control air flow, so air is left to flow freely.
- Grille direct the air with the help of fixed louver inclined at 0/15 deg
- Made of Heavy extruded aluminum frame and blade. Fixed bar grille suitable for both supply and return application in cooling and heating.
- Can be supplied without frame suitable for wooden frame fixing application.
02.
Air Diffusor
In HVAC systems, the air supply diffuser is a device that delivers and ventilates conditioned air in an area, mixes indoor air, and manages air output. It works by reducing the air duct velocity by increasing the static pressure.
- Made from Extruded aluminum frame and aluminum sheet core.
- Aluminum/GI Plenum Available for Uniform distribution of air.
- Multicone 4 way type design suitable for ceiling application with concentric arrangement for equal distribution of air in four direction.
03.
Air Dampers
An HVAC damper (also called a duct damper) is a movable plate, located in the ductwork, that regulates airflow and redirects it to specific areas of the home.
- Dampers are typically used in zoning or “zone control” systems.
04.
Return Air Plenum
Return Air Plenum of 250 mm depth , fabricated from suitable Gauge GI sheet of adequate thickness.
- The plenum shall be powder coated of approved color shed.
05.
Supply Air Plenum
SUPPLY AIR Plenum of 350 mm depth , fabricated from suitable Gauge GI sheet of adequate thickness
to The plenum shall be properly supported and acoustically insulated with 10 mm thick armasound /
equivalent material to reduce noise level .
- 3 nos Jet diffusers / nozzles shall be of suitable dia. The plenum shall be powder coated of approved shade .
06.
Collar damper
- Collar damper available in MS, GI and Aluminum Construction Suitable to fix into duct collar.
- Opposed blade operation and operated from front face of the grille /diffuser.
- Extruded Aluminum Collar damper can be supplied black anodized or in natural aluminum finish.
- Designed with nylon bushes for smooth and noise free operation.
07.
Fire Damper
- Fire dampers constructed from GI Heavy gauge construction 16G frame and Blade.
- It is use to close the duct opening in case of Fire condition.
- Without sleeve for Duct installation and with Extended sleeve (400mm,500& 600mm) option for wall application
- Fusible Link Type:
- In fusible link type Fire Damper Blades are held in the open position by a straight bar link (fitted as standard)
- In case of Fire when temperature reach 74deg, Fuse melting allow the spring to close the fire damper and create the barrier to the fire.
- UL stamped Fusible link operated at 74 deg. Temperature.
Motorized Type: Motorized Fire damper operates with panel and Temperature sensor, that sense the temperature in case of fire and passes the signal through panel to actuator to close the fire damper. - Single skin 3V type groove type blade for proper and closer interlocking of the blades.
- Opposed blades construction makes Fire damper for controlling the flow of air with the least disturbance to flow in ducts.
08.
GI Volume Control Damper
- Frame/Blade:
- High quality Galvanized sheet (18 G /20G as standard 16/16, 18/18, 16/18 also available. Single skin 3 V Groove design of the Blades for proper and closer interlocking of the blades.
- Designed for heating cooling and ventilation application.
- Application: General Purpose Volume control, opposed blade operation of the damper ensure the best v performance in airflow Modulating application.
- Parallel operation of the blade is also available on request.
- Overall Size: Nominal +60mm
- Standard depth: 120mm (150 also available on request)
- Proper welding on joints and protected by aluminum spray to avoid rusting.
- Handle with locking arrangement & open/close indication showing opening of the damper.
- Also available with Actuator for the motorized operation of the damper.
- Damper without flange is also available for insertion into duct system.
- Centre support mullion to provide the strength for bigger size damper, to ensure the high quality and efficiency of the damper.